Email: 
Call: 0844 822 1180
Humidifiers
Isothermal humidification
The isothermal humidification process involves introducing water vapour into the environment, which is generated by boiling water.
This procedure requires an external source of energy to change the state of the water.
As the mass of the water vapour is much lower than the mass of the air it is absorbed into, the temperature of the air increases slightly, and for this reason it is improperly called isothermal humidification.
Steam humidifiers ensure maximum hygienic safety, as the temperature of the steam ensures the absence of any potentially harmful microorganisms.
Adiabatic humidification
The adiabatic humidification process involves the direct evaporation of water in the air without the addition of energy from the outside: the water is finely atomised to maximise the heat exchange surface and then introduced into the environment.
The heat required for vaporisation is not supplied by external sources, but rather by the air being humidified, which as a consequence is cooled.
The power consumed by the mechanical action of adiabatic humidifiers is therefore quite low.
Humidifiers
Isothermal Humidifiers
ElectroVap Compact Steam
ElectroVap Electrode Boiler
Neptronic Gas Fired Steam
Neptronic Resistive Element Boiler
Neptronic Steam To Steam
Neptronic Direct Steam Injection
ElectroVap Electrode Boiler
Neptronic Gas Fired Steam
Neptronic Resistive Element Boiler
Neptronic Steam To Steam
Neptronic Direct Steam Injection
Adiabatic Humidifiers
Dehumidifiers
Water treatment
Humidity problems? Contact us!
