Humidity Solutions are glad to welcome Philip Shinfield into their technical services department.
6th – 8th September 2017
Humidity Solutions shall be exhibiting on stand 42 at this year’s AUE Conference which is being hosted by Nottingham Trent University and the conference theme looks at ‘Managing Complex Estates’.
The Cleanroom Technology Conference 2017 is being held at the National conference centre (National Motorbike Museum) on 12-13th Sept 2017. Humidity Solutions will be promoting the importance of bespoke humidity control solutions for cleanrooms and highlighting its ranges of humidifiers and dehumidifiers.
Humidity Solutions shall be exhibiting at the OM yoga show on stand H19 in London’s Alexandra Palace on the 20th , 21st and 22nd October.
Humidity Solutions has delivered a complete humidity control solution to the existing museum situated in the cloisters of Westminster Abbey, replacing an ageing humidifier that was proving costly to maintain.
Humidity Solutions Launches Versatile In-Duct Humidification System
Humidity Solutions has introduced the Airtec Hydrosens in-duct high pressure adiabatic humidification system, capable of modulating water flow in seven different combinations to deliver precise control in each space.
Humidity Solutions is delighted to announce the continued strengthening of its sales team with the addition of Simon Holden.
An adiabatic humidification solution without equal for humidifying in an AHU.
Rob Luddington and John Barker visited the ISH exhibition in Frankfurt to support Airtec their High pressure water supplier.
A fast response by Humidity Solutions, with provision of two mobile humidifiers, enabled Process Systems Enterprise (PSE) to quickly restore comfortable, healthy conditions following a power failure.
1.Electricity. Energy efficiency is a consideration, but not the primary consideration when choosing a dehumidifier for your boat. If you have an Air conditioner system this will dry but the energy consumption is much higher than the Energy consumption of a dehumidifier. The dehumidifier uses electricity only when it is needed or as set by the user. The Humidistat allows you to set the dryness to stop mould & mildew usually to maintain a cabin humidity level of around 60% relative humidity.
When Mooch Clothing had two control climatic issues, Humidity Solutions was able to solve both with one easy to install solution.
11-13th October 2017 at the Telford International Centre – Stand E03
Humidity solutions have supplied its 20th Vesuvius unit to a hot yoga studio which is to the new yoga shed in Hitchen, Hertfordshire.
Things are changing for boats, caravans, holiday home and classic car storage. Recently, a £1m yacht caught fire due to an electrical fault with a home dehumidifier that was being used on the boat to keep it dry.
Many existing buildings lack the effective humidity control that is necessary to maintain acceptable indoor air quality. John Barker of Humidity Solutions considers the options for retrofit Read More
With 2016 soon coming to a close Humidity Solutions would like to wish all their customers, suppliers and contacts a very Merry Christmas and a Happy New Year.
Here’s to 2017!
An Airtec high-pressure adiabatic humidification system – designed, supplied and installed by Humidity Solutions – is helping J&A Growers Ltd to create the cold store conditions required to keep young trees and hedging plants dormant until they are ready for planting.
A humidity solution from Airtec reduced the evaporation and thereby loss of whisky volume during the maturing process.
Taking Control of Humidity
MORE THAN THE SUM OF ITS PARTS –
To make a print business truly efficient you need an eye for detail, Brendan Perring investigates how pulling together an array of kit could help exponentially boost your performance.
Humidity Solutions after sales department have been hard at work making sure that the humidifiers and dehumidifiers out in service are running at their optimum and to ensure that our customers have the most cost effective solution for maintenance. Read More
A DFRA 0175E Dehumidifier has recently been delivered and installed at a Pharmaceutical company in Berkshire.
Humidity Solutions produced an article in H & V News August 2016 edition.
The article by John Barker focuses on the variation in building styles, age, services design and usage meaning that there is no ‘one size fits all’ for humidification.
Humidity Solutions have supplied a nozzles system to one of the UK’s top garden designers who is designing a show garden at the Hampton Court Palace flower show where they are creating a garden to highlight the problems associated with Bowel disease.
Plant & Works Engineering May 2016 features the article below:
Why is humidity control so important?
At the Drupa international print exhibition in Dusseldorf Germany. Launching the newly updated Easyline control panel and demonstrating the humidification system.
Lots of interest from all over the world with a large number of UK visitors interested in the advantages that the system provides of reduced static, dimensional stability and consistency of the environment in which to print.
Humidity solutions are pleased to announce the addition of a supurb range of refrigerant dehumidifiers which offer the ideal solutions for swimming pools and leisure centres as well as smaller drying applications such as laundary drying rooms, cellars, classic car storage or disaster recovery situations such as flooding and burst pipes.
Article Introduction as featured in Print Solutions May 2016 Edition:
Health Estate Article have published an editorial on Humidity Control in operating theatres.
A brief snippet of the article is below:
When determining humidity control requirements for operating theatres, engineers need to take account of clinical issues such as infection control as well as engineering criteria, explains John Barker, sales director at of specialist in humidification and dehumidification equipment, Humidity Solutions.
Southsea United FC have won the Hampshire FA Purcell Cup 2016
Humidity Group of the HEVAC Association have produced a white paper.
This draws together the research that has been carried out on Human comfort in Buildings and recommends humidity levels that should be maintained plus describes the health benefits and possible energy savings. Read More
Neptronic have released the HRO20 Wall Mounted Humidity Controller
As part of Fisair’s Expansion plan, there has been an increase in production which has enabled us to open a new dehumidifier production plant.
Over the last week Humidity Solutions have supplied their 80th Yoga Studio. Read More
In maintaining acceptable comfort conditions in workplaces, humidity control shouldn’t be an add-on that’s only included when budgets permit, it should be a standard requirement, says *John Barker.
The Eiger tower is designed to be the all in one solution in providing a controlled environment for a manufacturing process room.
FISAIR units have been validated by the prestigious German institute “Hygiene-Institut des Ruhrgebiets”. This certification is very important for AHU manufacturers because it means they can be sure that FISAIR units are the best choice for meeting all hygiene standards.
Humidity Solutions have been awarded the Neptronic Dominator Award 2015.
The New RO Inline water treatment range from Airtec includes a pressure vessel to allow effective smooth delivery of water to the humidifier or process that it is serving. This eliminates the need for an open tank or the recirculation of water through a UV steriliser whilst being stored.
Humidity Solutions are pleased to report that an Airtec high pressure water system has been invaluable in increasing production for over 4 years in a plastic foil extrusion plant. The major European manufacturer specialises in the production and distribution of high-barrier flexible packaging for the food, tobacco, and healthcare industries.
A humidification system designed and supplied by Humidity Solutions is helping leading construction connector manufacturer Simpson Strong-Tie to maintain precise humidity conditions in its timber conditioning chambers. The turnkey solution has used two Neptronic SKE resistive humidifiers, which have a high tolerance of mineral build-up without affecting output or control.
Humidity Solutions will be supporting Bowel Disease UK at the RHS Hampton Court Palace Flower Show in July 2016…more details to follow
Humidity Solutions has won through to the finals of the ACR News Awards 2016 in the Distributor/Wholesaler of the Year category. The company’s successful entry focuses on its recognition that each project has unique requirements and a commitment to delivering a holistic solution tailored to each customer’s needs and business priorities. Read More
Humidity Solutions is delighted to announce the continued strengthening of its sales team with the addition of Andy Munson.
It is well understood, and accepted, that effective humidity control is essential within any digital, litho or web print environment.
The Devatec ELMC Electrode boilers have approval for supply to many different markets including
These units are for delivery to a Screen printer who prints logo’s onto T shirts and has experienced issues with the water based inks drying on the screen which increases production times.
Humidity Solutions can now offer a new and improved weatherproof housing for their Devatec range of ELMC electrode boilers.
The picture shows how the Humidity Solutions Airtec system has been installed into a paint spray booth where train carriages are painted.
Humidity Solutions shall be exhibiting at the OM yoga show in London’s Alexandra Palace on the 23rd, 24th and 25th October.
The Humidity Solutions install team have been busy installing the latest humidifiers at various sites around the UK.
Continuing Professional Development (CPD) is a long term commitment of which Humidity Solutions are proud to become a CIBSE member of.
The Print Show 2015 at The NEC hall 3a is looking like being the place to be for the print industry and Humidity Solutions are pleased to announce our attendance on stand G37.
Humidity Solutions are delighted to announce the launch of the HEF range of evaporative coolers.
Humidity Solutions are proud to announce the launch of our new website which features improved navigation, enhanced compatibility with mobile devices and instant access to social media links. A new ‘online shop’ for spares and product hire has also been introduced.
The potential problems that can be caused by high humidity in cold rooms are typically tackled by dehumidifying the air. However, it is important to select the most appropriate solution for each application, as John Barker of Humidity Solutions explains.
Humidity Solutions has appointed Dave Mortimer as Northern Sales Manager for the company’s range of humidifiers and dehumidifiers.
Humidity Solutions has supplied an Airtec EasyLine humidification system to leading book printer CPI to provide effective and consistent humidity control at the company’s facility in Croydon, Surrey.
Humidity Solutions have pleasure in introducing Tom Barker who joined the Humidity Solutions team full time from September 2014.
Tom joined Humidity Solutions after studying at Leeds University and having worked for the company over several holiday periods whilst in education. Read More
Humidity Solutions have recently resolved several issues in a residential property by installing an SKR steam humidifier.
The house in Goring On Thames, Oxfordshire has recently undergone extensive renovation to a design by architect Kate Cooper of Absolute Architecture. This included measures to reduce noise levels from a nearby railway line – including acoustic double glazing and the absence of trickle vents that could act as a path for noise to travel through. Read More
Humidity Solutions had the pleasure of being introduced to Airtec’s new Export Sales Manager, Tanja Jorgensen who came the Humidity Solutions Head office in Leatherhead with Airtec’s Managing Director Bo Rahbek in the second week of January. Read More
The HVR Awards will be held on the 26th November 2014 at the Millennium Gloucester Hotel in London, with a gala dinner attended by hundreds of industry professionals.
Organised by Datateam Business Media, home to Heating and Ventilating Review, the awards provide an ideal opportunity to celebrate the innovations and achievements of the past twelve months, as well as allowing attendees to network with new and old contacts. Read More
Humidity control is often essential to the smooth running of cold stores, but the type
of humidity control varies from one application to another. John Barker of Humidity Solutions explains why some require dehumidification while for others humidification is the order of the day.
3 Days Until W14
As the environmental impact of refrigerant-based cooling is subjected to closer scrutiny there is growing interest in the use of evaporative humidifiers to control both temperature and relative humidity. John Barker of Humidity Solutions explains why. Read More
As both the financial and environmental costs of refrigerant-based cooling come under close scrutiny there are very good reasons for considering alternative technologies, says John Barker
The cooling effects of evaporating water have been known for thousands of years and used to good effect in a wide range of applications. In more recent decades this ‘low-tech’ approach has been superseded by refrigerant-based cooling, bringing with it a considerable increase in energy consumption – plus the additional environmental impact of using refrigerants.
Since 2008 Humidity Solutions has provided humidification and/or heating solutions to over 50 studios in the UK and Europe, gaining years of experience on how to achieve good temperature and humidity control.
It has become evident that while we are very familiar with environmental control, most new hot yoga studio owners are learning from scratch. Consequently they often don’t know the right questions to ask to prospective landlords, builders and heating companies. It is also clear that once studio owners have been through the trauma of find out through ‘the school of hard knocks’ they are reluctant to pass on this knowledge and knowhow for fear of losing commercial advantage.
Humidity Solutions are delighted to announce the continued strengthening of their Sales team with the addition of Wayne Hayward.
Wayne has many years experience of working in the HVAC sector inparticular serving the industrial and process industies. Wayne shall head Humidity Solutions expansion into the dehumidifier market bringing a high degree of experience as well as product and site knowledge to the team. Read More
Humidity Solutions have launched a range of dehumidifiers for the industrial and commercial sector. The desiccant dehumidifiers are idea for industrial process humidity control and low temperature dehumidification in areas such as warehouses and store rooms. Read More
Humidity Solutions are pleased to announce that they will be exhibiting at the OM Yoga Show which is being held in the National Hall at London Olympia on the 24-26th October.
Come and spend three days in yoga bliss, the total Yoga experience under one roof. The tenth annual Yoga Show will once again be held in the prestigious National Hall, Olympia. Read More
The beginning of June saw John Barker, Sales Director of Humidity Solutions visit Airtec which is located in Lemvig, Denmark.
The visit was to attend the Airtec distributors meeting which included workshops and presentations.
To the right is an image of the attendees. Read More
We are delighted to announce that we shall be moving premises to a new location within a stones through of our current location. We shall be operating from the new premises from 6th May 2014. Read More
Southsea Uniteds 2013/14 season ended over the weekend. After promotion last year they have gone from strength to strength with some very solid results and performances to match.
They have finished 3rd in the league and also had a brilliant cup run in the Purcell cup in which they reached the semi final where they were drawn against Hereford FC from the league above. It was a tense game which went to extra time and then penalties after a 4-4 score. However Hereford were clinical with their penalties and progressed to the final. Read More
Humidity Solutions would like to congratulate Ben Davies on his impressive 3rd place on 6th April 2014 at Rissington Kart Track. Here is his write up from the race day..
“It turned out to my most successful yet! Conditions throughout the day weren’t great with rain coming and going. But in difficult conditions on a drying track I managed to win the first heat of the day, which was my fist ever heat Win. Read More
Humidity Solutions are glad to announce that Barry Barnes has joined from Dar Al-Handasah Consultants and will be the new Finance Manager.
Humidity Solutions have completed the installation of Neptronic SKEs on Captain FPSO (Floating Production Storage & Offloading) which is located 134km (90 miles) north-east of Aberdeen. It lies in a water depth of 104m (341 ft). The Captain field is owned by Texaco North Sea Company and Korea Captain Company Ltd. The units had low smoke zero halogen wiring looms and were 440 volt versions which were installed onto the Captain’s accommodation facilities.
New York, New York!
Humidity Solutions attended the 2014 AHR Expo in New York City – where the HVAC industry comes to buy, sell, network and learn. It’s the world-class destination that drew heating and AC professionals from around the globe. Read More
Roger has taken on the role of Sales Manager at Humidity Solutions handling the complete portfolio of humidification and dehumidification equipment offered by Humidity Solutions with specific responsibility for promoting to the HVAC trade. He is seen here with Lindsey Henderson with the two of them demonstrating that it is not only humidity which has highs and lows. Read More
Humidity Solutions are sponsoring the IYSF UK National Yoga Asana Championships
Yoga Asana competitions are athletic competitions demonstrating the beauty of demanding yoga postures. Through dedication, discipline and the unyielding determination of the competitors, spectators can admire the body’s full range of motion and potential. Read More
Humidity Solutions recently setup their Linked In company page and also received their first recommendation in the process from
Liam O’Donnell Site / Terminal Manager at Eco-Oil Ltd
I’ve written this recommendation of your work to share with other LinkedIn users. Read More
Humidity Solutions has continued its support of Ben Davies who races in Senior Rotax (125cc) at Little Rissington kart circuit in Gloucestershire.
Another karting season has finished with the new one only a couple of months away. Ben thinks the season got better as it went on this year, things didn’t seem to be going his way at the start but then things started too look up. He has improved his lap times and consistency and is certainly running further forward than last year although still couldn’t quite manage a race win. There’s literally only tenths of a second spreading most of the field, but in motor sport that can be very hard to find! Read More
Humidity Solutions has introduced the Neptronic X-Stream steam distributor, capable of reducing energy wastage in steam humidifiers serving HVAC systems by as much as 85%, with a typical return on investment within 15 months.
Th X-Stream is compatible with resistive, gas-fired, steam-to-steam and direct steam injection humidifiers. Its energy saving capabilities played a key role in the Neptronic SKD direct steam injection humidifier winning the Innovation Award at AHR Expo 2014. Read More
Humidity Solutions are proud to announce that they are exhibiting at W14, 5-8th October at Birmingham’s NEC.
W14 is the national exhibition for joinery and furniture manufacturers in the UK. This event is the ‘must see’ show for manufacturers of all sizes working across a huge range of product sizes. Read More
Humidity control without high energy bills.
Humidity control is vital in maintaining workplace comfort but often overlooked. John Barker of Humidity Solutions discusses energy-efficient retrofit options.
The Neptronic SKD is the winner of the 2014 AHR Expo Innovation Award!
The unit is the only automated and most efficient direct steam injection humidifier in the world.
The new generation of direct steam humidification includes features such as:
– Patent pending X-Stream technology – a high efficiency insulated distributor
– Double wall 304 stainless steel with encapsulated Armacell UT/Solafex foam insulation
– Manages operating sequences with a factory configured electronic steam controller (SKDESC)
– Patent pending re-evaporator provides drain-free operation
– Reduces wasted energy by 85%
– Prevents condensate ejection
The Airtec high pressure water humidification system has been employed within abattoirs to greatly reduce financial losses within this market sector. The way of achieving this is to reduce the weight loss from the carcases as they are cooled from body temperature at 37°C to 12°C in a 12 hour period. During this period the product can lose up to 3% of its weight due to the carcase loosing moisture through the refrigeration process.
Humidity Solutions Sales Director John Barker is featured in this months Heating & Ventilation News publication.
In article reads:
Q&A – “Armageddon has probably been brought about by introducing my dinner guests”
John Barker – Sales Director at Humidity Solutions, on Kylie Minogue’s company, brown sauce and the privatisation of the M25
Association of University Engineers gala dinner 2013 was held at the National Maritime Museum Greenwich with guest speaker Dick Strawbridge.
Humidity Solutions exhibited their range of low energy humidifiers at the conference exhibition with Lindsey Henderson and John Barker attending the Gala Dinner. Read More
Humidity Solutions, John Barker, recently completed the 980 mile Land’s End to John O’Groats challenge over nine days to raise funds for Cancer Research UK. With generous donations from Humidity Solutions suppliers – Neptronic, Devatec, Fisair and Airtec plus colleagues and friends over £3,000.00 was raised.
The picture shows John having a brief break in the High Lands of Scotland and shows some of the stunning scenery which the UK has to offer. Read More
Humidity Solutions whilst exhibiting at the Association of University Engineers conference at Goldsmiths University of London in early September took part in an the evening’s entertainment which was in the form of a quiz this year.
During a very pleasant evening the 20 tables answered a series of general knowledge questions with the Humidity Solutions Table come out winners in a closely fort contest. Read More
Humidity Solutions have been providing my studio Bikram Yoga Brighton with the correct environment to allow my clients to sweat to their optimum. Without sweat Bikram Yoga would not be the same. Sweating through the largest organ of your body your skin, allows practitioners to detox and get a great deal hotter than with just dry heat. The service I have received from Humidity solutions from day 1 has been exceptional. I know the names of all the team and they have been on hand whenever I needed help. Read More
Humidity Solutions Director Lindsey Henderson recently visited Juan Boeta Tejera, Managing Director of Tecniseco, who manufacture the Fisair range of Evaporative humidifiers and desiccant dehumidifiers
Fisair is composed of a team of HVAC equipment technicians with a wealth of experience in air treatment based on humidity content. Read More
Humidity Solutions are pleased to announce that they will be exhibiting at the OM Yoga Show which is being held in the National Hall at London Olympia on the 25-27th October.
Come and spend three days in yoga bliss, the total Yoga experience under one roof. The ninth annual Yoga Show will once again be held in the prestigious National Hall, Olympia. Read More
Humidity Solutions are proud to announce that in their first season, Southsea United have been promoted. It was a close league this year and it did go into the final game of the season with the chance of winning the league still up for grabs but sadly results didn’t go their way and Southsea United finished second.
Humidity Solutions are pleased to announce the launch of a new fan distribution unit which allows humidity to be added to applications where there isn’t any suitable ductwork and the humidifier should not be seen. This is thanks to the Neptronic Remote SDU for the Neptronic SKR unit.
Museums, art galleries, houses and humidors are typical of applications where humidity is desired or required but the aesthetics of the room is important and visually a humidifier is not acceptable. Read More
Plug & Spray concept now featuring an improved controls system which is now on the unit and no longer controlled via the humidistat.
The perfect direct air application product for industries such as print & wood.
Airtec® EasyLine high-pressure air humidification system is targeted at medium to large sized areas.
Airtec® EasyLine is built with the control, solenoid valves, pump, display, frequency inverter and flow control – as a self contained unit. Its so much more than just an optimised solution.
Humidity Solutions are pleased to have been invited to exhibit at The Association of University Engineers conference on the 4-6th September 2013. This year’s event is being held at Goldsmiths, University of London after following on from a successful conference at Keele University in 2012. Read More
Humidity Solutions are proud to announce that they are one of the sponsors for The National Yoga Asana Championships in 2013, taking place at The Grange Hotel London on the 20th April 2013.
We are delighted to be involved and wish all the participants the very best for the competition. Read More
Humidity Solutions have been installing humidifiers in hot yoga studios and are happy to add some testimonials of which we are very proud of.
“We found John, Rob and the team superb from the word go. They really know their stuff when it comes to humidity problems and they provide and efficient, timely and professional service. We will be using them again without hesitation for our next studio launch.” – FeelHotYoga Read More
Humidity Solutions thoroughly enjoyed exhibiting at SPATEX 2013. The exhibition ran from February 3rd through to 5th and is the longest established and leading event for the wet leisure sector.
Humidity Solutions showcased the latest steam generator for steambath applications which was a well received spectacle for the exhibition visitors.
Offering Neptronic resistive technologies or Devatec electrode boiler, all applications are catered for as either a simple stand alone steam generator or for a complete solution where the wellness unit controls essence, operation of lights and can be supplied with a remote controller. The ideal solutions for your steam bath/room application.
For further details please contact Humidity Solutions on 0844 822 1180 or email firstname.lastname@example.org
Pictured are John Barker of Humidity Solutions & Bo Rahbek of Airtec
Airtec are celebrating a successful first year of cooperation with Humidity Solutions Ltd.
The first year has been a productive one with the installation of humidification systems to industries as diverse as the print industry to tree storage as well as high tech glass fibre aircraft construction. Read More
Steam bath steam generators have for many years been supplied by Humidity Solutions Ltd to the steam bath industry whether it be to manufacturers, facilities engineers or end user pool managers.
Offering Devatec electrode boiler or Neptronic resistive technologies all applications are catered for as either a simple stand alone steam generator or for a complete solution where the Wellness unit controls essence, operation of lights and can be supplied with a remote controller. Read More
Humidity Solutions shall be exhibiting at SPATEX 2013. This runs from February 3rd through to 5th and is the longest established and leading event for the wet leisure sector.
Humidity Solutions will be showcasing the latest steam generator for steambath applications.
Attendance is free to business and trade visitors and by attending you will be sure to:
Humidity control of offices, call centres, museums is a problem when the buildings are served with ceiling mounted fan coil units. The reason is that the fan coils provide excellent temperature control to the areas they serve but in winter they do not add moisture to maintain a comfortable humidity level when the natural humidity is at its lowest. In the summer the cooling strips out moisture from the air making the environment uncomfortably dry.
Humidity Solutions Ltd has introduced a scrapage scheme where additional discounts are able to be offered to replace old inefficient humidifiers. Supported by Devatec and Neptronic, leading manufacturers of Electrode and resistive steam humidifier equipment, humidifiers of any manufacture requiring expensive spares are able to be replaced with the latest technology. The attractive pricing means that payback is often very short. With high cost of spares from some suppliers replacement is often the most cost effect way forward even if the humidifier is only a few years old.
Humidifiers pose a unique issue when designing a roof top or outdoor system as the need to prevent the water within the humidifier from freezing but equally keeping the electronics cool has to be considered.
When considering a humidifier for installation outdoors, factors such as weatherproof design, ease of installation and operation, as well as ensuring reliability and performance become a major factor but are often ignored.
Humidity Solutions are proud to announce that have teamed up with Southsea United FC as this seasons shirt sponsor.
The team is based in Portsmouth and has been formed this season, they are hoping to have a season full of strong league results and a good cup run. Read More
Humidity Solutions are introducing the ElectroVap MC Steam Bath Generator.
This unit has been specially designed for steam bath applications to give the operator the most enjoyable and relaxing experience whilst in the steam bath.
Humidity Solutions are delighted to announce the continued strengthening of their Service team with the addition of Ian Stevenson.
Ian has many years experience of working on humidifiers having previously worked for Walter Meier and shall bring a high degree of experience as well as product and site knowledge to the team.
Humidifiers are becoming an essential for many of our leisure activities. Hot yoga is becoming increasing popular where students practice yoga in a studio at 40°C and 50%rh to protect muscles by allowing for a deeper stretch while also detoxifying the body by opening the skins pores to let the toxins out in sweat. Many of the world’s top celebrates and sports stars have stated their dependence on this form of exercise.
Humidity Solutions Sales Director John Barker shall be on the Airtec stand at Drupa 2012 in Dusseldorf Germany. This runs from May 3rd through to 16th and is the largest Print exhibition in Europe and a must for European printers.
Airtec shall be exhibiting in Hall 16 stand A64 and demonstrating their range of high pressure water humidifiers which are ideally suited to all print applications from digital print rooms to plate making studio’s right up to Newsprint press hall humidity control. Read More
Humidity Solutions are delighted to announce the addition of three new sales staff to the team.
Roger Palamarczuk has many years experience of humidification after working at Eaton Williams (Vapac) and at Walter Meier and shall be covering London and the South East with Bob Goodger who is equally knowledgeable through working in the AC and distribution trade. Read More
The title is not a new concept or surprising but it is amazing how many end users do not plan the maintenance of industrial plant to ensure the smooth running of their establishment and to save money.
A planned maintenance contract is generally priced at a lower hourly or daily rate than an emergency callout charge. Over the life time of the equipment a regular maintenance contract ensures that the equipment is in the best possible condition to serve its purpose and thus provide a monetary saving by avoiding these costly callouts.
Hevar Exhibition 2012
The NEC, Birmingham plays host to the Hevar 2012 exhibition which is part of Sustainability Live, taking place from the 22nd to 24th May. Humidity Solutions shall be exhibiting on stand V18 where we shall be demonstrating the widest range of humidifiers on the UK market.
Humidity Solutions Ltd and Danish Humidifier manufacturer Airtec have both seen an expansion in all sectors of the print markets and have joined forces to take advantage of this growth. Using the Airtec technology alongside Humidity Solutions UK and Ireland market and application knowledge they have a strong team of engineers able to recommend the best humidity control and or environmental cooling for all requirements. Read More
Humidity Solutions are excited to announce that they are now the exclusive distributor for the Airtec product range which includes:
– Airtec EasyLine
– Airtec HydroLine
– Airtec DigiSens
– Airtec HydroJet Ventilated Atomizer
– Airtec HydroTrio Ventilated Atomizer
– Airtec HydroBasic Control Unit
– Airtec Sliplock Nozzles
Humidity Solutions Ltd are delighted to announce that they are now social networking.
The sites will be used to keep interested parties upto date with latest news, product launches and modifications, as well as spares and product offers. Read More
Humidity Solutions Ltd have a large range of ex stock spares available.
These spares include Carel, ElectroVap, Devatec and Neptronic parts available for all units. Ranging from cylinders to panels and electronic spares.
If you require a part please give us a call on 0844 822 1180 or email email@example.com Read More
Humidity Solutions are delighted to announce that they have signed an exclusive agreement with Devatec – the manufacturers of the Electro Vap Electrode boiler humidifiers.
Alex Ziche, Sales Manager for Devatec, who is shown in the photo at Humidity Read More
Humidity Solutions Ltd have pleasure in announcing that they are the New Exclusive distributor for the SKE, SKG and SKR range of Neptronic humidifiers.
This new agreement brings Neptronic, the leading brand of steam humidifiers Read More
On the evening of the 11th October 2011 Humidity Solutions shall be presenting the award for the Best Ventilation product of the year award at the Annual HVR Industry Awards.
Humidity Solutions are delighted to be associated with this prestigious Read More
Due to further growth Humidity Solutions Ltd are interested to hear from good quality Sales and Service / Maintenance staff.
External Sales Engineers are required with Humidity control experience or experience from a related industry. Read More
Humidity Solutions Ltd supplies, installs, and maintains humidifiers and dehumidifiers in a wide range of industries throughout the UK. Our service and installation engineers therefore face not only the risk associated with working on humidifiers but also those associated with our client’s activities. Read More
Humidity Solutions have helped the fitness of the nation by installing a Carel Humisteam Humidifier at the Bikram Hot Yoga Studio Soho. Hot yoga takes place in a room held at over 40C which protects muscles by allowing for a deeper stretch while also detoxifying the body by opening the skins pores to let the toxins out in sweat. Read More
It is easy to forget about your humidifiers until your environment fails to meet your needs. This can be a real problem in the winter months when demand for humidification is typically at its highest. Read More
HEVAC, the Heating, Ventilation and Air Conditioning Manufacturers Association have released a new code of practice covering humidifier maintenance. This useful guide gives you clear, straight forward advice and what you should do to help ensure reliable and safe operation. Read More
HumiServ, the service and installation division of Humidity Solutions provides a nationwide aftercare package for all makes of humidifier.
With more than 20 years experience in installing, commissioning, servicing, refurbishment and replacement of Read More